HP M1005 Reset

If your HP M1005 Scanner showing Error code 6, Scanner Error code 12, Scanner Error code 100, Scanner Error code 200, or Scanner Error code 300 is displayed on the HP LaserJet M1005 control panel

To gain access to the secondary service menu 
1. Make sure that the control-panel display reads Ready. 
2. Press Menu/Enter. 
3. Press < and OK buttons simultaneously. 
4. When the message Main Menu 2ndary Service appears on the display, press OK. 
5. Use the < or > button to navigate the secondary service menu. 
6. To exit the secondary service menu, press Cancel to return to the Ready display, 
and then press cancel again


HP M1005 Reset, HP M1005 Scanner Reset, HP M1005 Scanner Problems, HP M1005 Scanner issues

No comments :